FCC Unit Troubleshooting & Catalyst Optimisation

Upcoming Sessions

Classroom sessions
Online sessions

About This FCC Unit Troubleshooting & Catalyst Optimisation Training Course

The Fluid Catalytic Cracking (FCC) unit serves as a primary driver of profitability and high-octane yield in modern refinery operations. However, maintaining peak performance requires navigating intricate interactions between feedstock quality, reactor-riser dynamics, catalyst activity, and regenerator thermal balances. Without precise operational control, refineries face frequent operating bottlenecks, reduced conversion rates, and hardware degradation.

This comprehensive FCC Unit Troubleshooting & Catalyst Optimisation Training Course equips participants with actionable analytical methodologies to diagnose operational instabilities, control catalyst deactivation, and resolve equipment constraints. By systematically analyzing process variables across the reactor, regenerator, fractionator, and gas plant sections, professionals learn to implement targeted troubleshooting strategies that immediately enhance conversion efficiency and operational reliability.

Key highlights of this training course include:

  • Mastering FCC unit process mechanisms, reactor-riser kinetics, and conversion yield dynamics.
  • Diagnosing operational constraints including catalyst losses, regenerator afterburn, and wet gas compressor limitations.
  • Evaluating equilibrium catalyst performance, zeolite activity, and deactivation from heavy metal contaminants.
  • Implementing practical troubleshooting workflows to resolve fractionator flooding, slurry circuit fouling, and product quality issues.
  • Optimizing operating parameters to maximize high-value yield recovery and overall refinery energy efficiency.

Expected Outcomes

By attending this comprehensive FCC Unit Troubleshooting & Catalyst Optimisation Training Course, participants will gain actionable expertise to diagnose process bottlenecks, enhance conversion performance, and safeguard plant integrity through the following key competencies:

  • Evaluate reaction chemistry and riser dynamics to optimize feed atomization, reaction severity, and product selectivity.
  • Analyze feedstock properties, including Conradson carbon, sulfur, nitrogen, and heavy metal impacts on unit performance.
  • Troubleshoot regenerator operating parameters, air distribution patterns, combustion modes, and dilute-phase afterburn conditions.
  • Manage fresh and equilibrium catalyst inventories while evaluating zeolite activity and additive performance strategies.
  • Diagnose operational limitations within the main fractionator, wet gas compressor, and gas concentration recovery sections.
  • Apply systematic troubleshooting methodologies to mitigate catalyst loss, equipment erosion, refractory damage, and unit shutdown risks.

Training Method

This FCC Unit Troubleshooting & Catalyst Optimisation Training Course utilizes an interactive, practical learning approach designed to translate complex technical principles into real-world operational solutions. The delivery incorporates structured technical presentations, process flow diagram analyses, and actual refinery operational datasets to provide a clear understanding of FCC unit behaviors and constraints.

Participants actively engage in hands-on troubleshooting exercises, catalyst performance evaluations, and practical case studies covering real-world operating scenarios. Through collaborative group problem-solving and trainer-led discussions, attendees develop proven frameworks to identify root causes, calculate mass and heat balances, and implement immediate corrective actions back at their operational facilities.

This Course is Best For

This specialized FCC Unit Troubleshooting & Catalyst Optimisation Training Course is designed for engineering and operational personnel responsible for maintaining unit reliability, optimizing product yields, and troubleshooting process disturbances within refinery FCC assets.

This course is ideal for:

  • Refinery process engineers and operations engineers
  • FCC unit operations supervisors and shift engineers
  • Catalyst technical services specialists and process technologists
  • Process control, instrumentation, and automation engineers
  • Maintenance, inspection, and mechanical integrity specialists
  • Refinery planning, optimization, and laboratory technical personnel

Course Outline

Day 1: FCC Process Fundamentals and Feedstock Evaluation

  • Role of the FCC unit within the refinery configuration
  • FCC reaction mechanisms and catalytic cracking chemistry
  • Overview of reactor, regenerator and fractionation systems
  • Riser cracking, reaction time, temperature and catalyst-to-oil ratio
  • Feedstock properties affecting conversion and selectivity
  • Effects of Conradson carbon, sulphur, nitrogen and metals
  • Feed preheating, atomisation and injection performance
  • FCC material balance, conversion and yield calculations 

Day 2: Reactor and Riser Performance Optimisation

  • Feed and catalyst contacting within the riser
  • Influence of riser outlet temperature and reaction severity
  • Catalyst circulation and catalyst-to-oil ratio optimisation
  • Feed nozzle performance and atomisation problems
  • Reactor cyclone operation and catalyst separation
  • Causes of low conversion and poor product selectivity
  • Dry gas, LPG, gasoline, light cycle oil and slurry yield control
  • Troubleshooting riser, reactor and disengager performance 

Day 3: Regenerator Operations and Troubleshooting

  • Coke combustion and regenerator heat balance
  • Full-combustion and partial-combustion operating modes
  • Air distribution, combustion efficiency and flue-gas analysis
  • Dense-bed temperature and dilute-phase temperature control
  • Causes, consequences and prevention of regenerator afterburn
  • Troubleshooting high carbon on regenerated catalyst
  • Cyclone efficiency, catalyst losses and particulate emissions
  • Regenerator constraints, erosion and refractory concerns 

Day 4: FCC Catalyst Management and Optimisation

  • FCC catalyst composition, properties and performance functions
  • Zeolite activity, matrix properties and pore structure
  • Fresh catalyst, equilibrium catalyst and catalyst inventory
  • Catalyst deactivation by steam, metals and contaminants
  • Effects of nickel, vanadium, iron, sodium and calcium
  • Catalyst additives for octane, SOx reduction and combustion control
  • Equilibrium catalyst sampling, testing and data interpretation
  • Optimising catalyst addition and withdrawal strategies 

Day 5: Product Recovery, Troubleshooting and Unit Optimisation

  • Main fractionator operation and heat-balance management
  • Troubleshooting flooding, foaming, entrainment and slurry problems
  • Wet gas compressor performance and operating limitations
  • Gas concentration and LPG recovery-system troubleshooting
  • Product-quality problems and corrective operating actions
  • Identifying unit bottlenecks and throughput limitations
  • Energy efficiency, emissions reduction and reliability improvement
  • Integrated FCC troubleshooting and optimisation case study

Providers and Associations

Anderson
Aztech Training
Coventry

Certificates

  • COPEX Certificate of Attendance will be provided to delegates who attend and complete the course

Material published by Copex shown here is copyrighted. All rights reserved. Any unauthorized copying, distribution, use, dissemination, downloading, storing (in any medium), transmission, reproduction or reliance in whole or any part of this course outline is prohibited and will constitute an infringement of copyright.

What Makes Copex Courses Unique?

COPEX Training is your gateway to professional growth, with over 20 years of experience turning potential into success. Each year, we deliver over 1,000 courses in 50+ countries, earning a stellar 98% satisfaction rate. Trusted by global giants like BP, the United Nations, and HSBC, we partner with top certification bodies to provide career-focused training that empowers individuals and drives organizational breakthroughs. Our mission? To transform the way professionals learn and grow in today’s fast-changing industries. Through expert insights, cutting-edge methods, and hands-on approaches, we equip you with the skills and confidence to tackle challenges, seize opportunities, and thrive in your career.

Led by a passionate leadership team and supported by a network of world-class trainers, COPEX Training connects professionals worldwide with life-changing opportunities. We are committed to excellence, ensuring every participant leaves with the tools, expertise, and confidence to conquer an ever-evolving world.

Related Categories

Frequently Asked Questions

This FAQ section provides quick answers to the most common questions about our services, procedures, and policies. We aim to make your experience with us as straightforward as possible. For further assistance, our support team is ready to help.

COPEX in-house training

We can customize this training course for you!

At Copex Training, we offer customizable courses designed to fit your specific needs. Whether it is refining procurement practices or enhancing leadership and management skills, we tailor our programs to meet your unique goals and challenges. Let us create a training solution that delivers real results for your team.